TM 10-3930-675-24-2
TOPHANDLER LEVELING CYLINDER REPLACEMENT - CONTINUED
0257 00
CAUTION
Wipe area clean around all hydraulic connections prior to disconnecting. Cap or plug all openings
after disconnecting. Contamination of hydraulic system could result in equipment failure.
NOTE
All tophandler leveling cylinders are replaced in the same manner.
Tag all hydraulic lines.
REMOVAL
1.
Remove hose clamp (5) from hydraulic hose (2) and cylinder (4).
2.
Disconnect two hydraulic hoses (2) from cylinder (4).
WARNING
Tophandler leveling cylinder weighs 97 lb (44 kg). Lifting device must have sufficient capacity to lift
cylinder. Failure to follow this warning may result in death or injury to personnel.
3.
Attach a nylon sling to cylinder (4) and attach sling to suitable lifting device.
4.
Remove lockring (3) and pin (1).
5.
Repeat step 4 at opposite end of cylinder (4).
6.
Remove cylinder (4) from tophandler.
1
2
3
5
4
1
3
0257 00-2