TM 10-3930-675-24-2
TOPHANDLER LEVELING CYLINDER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Rag, Wiping (Item 30, WP 0290 00)
Direct Support
Tag, Marker (Item 38, WP 0290 00)
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic's (Item 128, WP 0289
Two
Pan, Drain (Item 76, WP 0289 00)
References
Pliers, Retaining Ring (Item 81, WP 0289 00)
Sling, Nylon (Item 112, WP 0289 00)
Materials/Parts
Equipment Condition
Cap Set, Protective (Item 5, WP 0290 00)
Tophandler supported with leveling cylinders fully
Grease, Automotive and Artillery, GAA (Item 20,
collapsed (TM 10-3930-675-10)
Hydraulic system pressure relieved (WP 0164 00)
Oil, Lubricating, OE/HDO 10 (Item 26, WP 0290
Parking brake applied (TM 10-3930-675-10)
WARNING
DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pres-
sure has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid
under pressure can penetrate the skin, causing serious injury.
Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If
an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically
removed within a few hours or gangrene may result.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting
any hydraulic lines. Failure to do so could result in injury.
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
Use extreme caution when handling heavy parts. Provide adequate support and use assistance
during procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this warning
may result in death or injury to personnel.
Tophandler leveling cylinder weighs 97 lb (44 kg). Lifting device must have sufficient capacity to
lift cylinder. Failure to follow this warning may result in death or injury to personnel.
