TM 10-3930-675-24-2
CYLINDER BLOCK REPAIR - CONTINUED
0271 00
INSPECTION - CONTINUED
7.
Measure cylinder liner inside diameter 90 degrees apart at top, middle, and bottom of piston travel. Measurement must
be 4.9213 to 4.9250 in. (125.000 to 125.095 mm). If not as specified, replace liner.
INSIDE DIAMETER, CYLINDER LINER
8.
Measure cylinder liner top press fit outside diameter. Measurement must be 5.7456 to 5.7471 in. (145.938 to 145.976
mm). If not as specified, replace liner.
OUTSIDE DIAMETER, CYLINDER LINER TOP PRESS FIT
0271 00-9
