TM 10-3930-675-24-2
CAMSHAFT AND DRIVE GEAR REPLACEMENT - CONTINUED
0274 00
INSPECTION - CONTINUED
b.
Gear mounting surface outside diameter: 1.8499 to 1.8509 in. (46.987 to 47.013 mm).
OUTSIDE DIAMETER, GEAR MOUNTING SURFACE
c.
Thrust washer plate journal outside diameter: 2.1575 to 2.1732 in. (54.800 to 55.200 mm).
OUTSIDE DIAMETER, THRUST WASHER PLATE JOURNAL
4.
Measure camshaft drive gear bore inside diameter: Measurement should be 1.8469 to 1.8479 in. (46.912 to 46.938 mm).
If not as specified, replace camshaft drive gear.
INSIDE DIAMETER, CAMSHAFT DRIVE GEAR BORE
5.
Measure thrust washer plate as follows. If not as specified, replace thrust washer plate.
a.
Thickness: 0.353 to 0.356 in. (8.96 to 9.04 mm).
0274 00-6
