TM 10-3930-675-24-2
IDLER GEARS AND CAMSHAFT DRIVE GEAR REPLACEMENT - CONTINUED
0276 00
REMOVAL - CONTINUED
5.
Remove camshaft drive gear as follows:
a.
Install two puller adapters (20) in opposite holes in camshaft drive gear (19).
20
19
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in
injury to personnel.
b.
Attach camshaft gear puller assembly (21) to suitable lifting device.
21
0276 00-4