TM 10-3930-675-24-2
CAM FOLLOWER ASSEMBLY MAINTENANCE - CONTINUED
0275 00
INSTALLATION - CONTINUED
13.
Install 0.030 in. (0.76 mm) thickness gage between no. 5 cam follower shaft support and exhaust lever for cylinder no. 4.
14.
Push no. 5 cam follower levers toward no. 4 cam follower shaft support. Tighten no. 5 cam follower stud nut to 35 lb-ft
(47 Nm).
NO. 4
SUPPORT
NO. 5
SUPPORT
15.
Install 0.030 in. (0.76 mm) thickness gage between no. 6 cam follower shaft support and intake lever for cylinder no. 5.
16.
Push no. 6 cam follower levers toward no. 5 cam follower shaft support. Tighten no. 6 cam follower stud nut to 35 lb-ft
(47 Nm).
NO. 5
SUPPORT
NO. 6
SUPPORT
0275 00-9