TM 5-3810-306-34
27.
DISASSEMBLE REVERSE AND 3RD CLUTCH
h. Relieve pressure on retaining ring (193) and
(204).
remove retaining ring (193), spring retainer
(194), spring (195) and spring retainer (196).
a. Remove three piston rings (182).
i. Remove clutch discs (199 and 200).
b. Remove retaining ring (183).
j. Turn housing (204) over on a block of wood and
c. Using puller remove bearing (183).
remove piston (201), piston ring (202) and
preformed packing (203). Discard packing (203).
d. Using puller remove gear (188) with bearing
(186).
k. Using puller remove bearing (205).
e. Using puller remove bearing (191).
1. Using puller remove gear (209) with bearing
(206).
f. Remove retaining ring (197) and clutch plate
(198).
m. Remove retaining ring (207) and spacer (208).
g. Using clutch spring tool (Item 9, Appendix C),
n. Remove retaining rings (210) and (218).
compress retaining ring (193) and remove
retaining ring (192).
o. Remove clutch plate (219) and clutch discs (220)
and (221).
7-37
