TM 5-3810-306-34
28.
DISASSEMBLE SIX SPEED IDLER SHAFT
e. Using a suitable bearing puller, remove bearing
(224b).
ASSEMBLY (64).
f. Remove locating ring (224c).
CAUTION
g. Using a suitable press, remove gear (224e).
Use care to prevent damage to
bearing cage (224h).
29.
REMOVE OIL TUBES (230) AND (233).
a. Using a suitable bearing puller, remove bearing
a. Remove two capscrews (225), spacer (226) and
(224h).
preformed packing (227).
Discard packing
(227).
b. Remove gear (224g).
b. Remove nut (228), clamp (229) and tube (230).
c. Remove spacer (224f).
c. Remove two sleeves (232), preformed packings
d. Remove retaining ring (224a).
(231) and tube (233). Discard packing (231).
d. Remove strainer (236)
and
gasket
(237).
Discard gasket (237).
e. Remove oil baffle (235).
7-39
