TM 5-3810-306-34
ASSEMBLY:
1.
INSTALL OIL TUBES (230) AND (233).
NOTE
a. Install oil baffle (235).
Lubricate all preformed packings and
b. Install strainer (236) and new gasket (237).
seals with clean oil MIL-L-2104 SAE
10 prior to installation. Apply this
c. Install tube (233) with sleeves (232) and new
coat of Permatex No. 2 on outer
preformed packings (231).
diameter of oil seals to assure tight
fit.
d. Install tube (230) and secure with clamp (229)
and nut (228).
Coat metal-type sealing rings with a
e. Install new preformed packing (227), spacer
light coat of grease MIL-G-10924.
(226) and two capscrews (225).
7-43
