TM 5-3810-306-34
2.
ASSEMBLE REVERSE AND 3RD CLUTCH
m. Install new preformed packing (203) and piston
(204).
ring (202) on piston (201).
a. Install new preformed packing (224) and new
CAUTION
piston ring (223) in piston (222).
Do not damage preformed packing
CAUTION
(203) and piston ring (202).
Do not damage preformed packing
n. Install piston (201) in housing (204).
(224) and piston ring (223).
o. Install spring retainer (196), spring (195), spring
retainer (194), and retaining ring (193). Using
b. Install piston (222) in housing (204).
retaining ring (192).
c. Install spring retainer (217), spring (216), spring
retainer (215), and retaining ring (214). Using
p. Install one steel clutch disc (199).
retaining ring (213).
q. Install one friction clutch disc (200). Alternate
one steel clutch disc (199) and one friction disc
d. Install one steel clutch disc (220).
(200) until all have been installed.
e. Install one friction clutch disc (221). Alternate
r. Install clutch plate (198) and retaining ring (197).
one steel clutch disc (220) and one friction clutch
disc (221) until all have been installed.
s. Install retaining ring (189).
f. Install clutch plate (219) and retaining ring (218).
t. Press bearing (191) into position.
g. Install retaining ring (210).
u. Install gear (188) onto housing shaft (204). Algin
gear splines with internal teeth of friction discs
h. Press bearing (212) onto housing shaft (204).
and tap gear into position.
i. Install gear (209) into housing shaft (204). Align
v. Press bearing (186) into position and install
gear splines with internal teeth of friction discs
retaining ring (185).
and tap gear into position.
w. Press bearing (184) into position and install
NOTE
retaining ring (183).
Gear (209) splines must be aligned
x. Apply grease MIL-L-10924 to piston rings (182).
with internal teeth of all friction discs.
Install piston rings (182).
j. Install spacer (208) and retaining ring (207).
k. Press bearing (206) into position.
l. Press bearing (205) into position.
7-44