TM 5-3810-306-34
3. ASSEMBLE FORWARD AND 2ND CLUTCH (169).
clutch disc (164) and one friction clutch disc (165) until
all have been installed.
a. Install new preformed packing (170) and new
piston ring (171) in piston (172).
l.
Install clutch plate (163) and retaining ring (162).
m. Install retaining ring (154)
CAUTION
n. Press bearing (156) into position.
Do not damage preformed packing
(170) and piston ring (171).
NOTE
b. Install piston (172) in housing (169).
Gear (153) must be in full position.
Do not force this operation.
c.
Install spring retainer (177), spring (178), spring
retainer (179) and retaining spring (180). Using
clutch spring tool (Item 9, Appendix C), install
o. Install gear (153) onto housing shaft (169). Align
retaining ring (181).
gear splines with external teeth of friction discs
and tap gear into position.
d. Install one steel clutch disc (173).
p. Press bearing (151) into position and install
e. Install one friction clutch disc (221). Alternate
retaining ring (150).
one steel clutch disc (220) and one friction clutch
disc (221) until all have been installed.
q. Install special ring (149).
f.
Install clutch plate (175) and retaining ring (176).
r.
Press bearing (148) into position and install
retaining ring (147).
g. Install new preformed packing (168) and new
piston ring (167) in piston (166).
s.
Apply grease MIL-L-10924 to piston rings (146).
Install piston rings (146).
h. Install piston (166) in housing (169).
4. ASSEMBLE LOW CLUTCH (71).
i.
Install spring retainer (161), spring (160), spring
retainer (159) and retaining spring (158). Using
a. Install new preformed packing (144) and new
clutch spring tool (Item 9, Appendix C), install
piston ring (143) in piston (142).
retainer ring (157).
CAUTION
j.
Install one steel clutch disc (164).
Do not damage preformed packing
k.
Install one friction clutch disc (165). Alternate
(144) and piston ring (143).
one steel
b. Install piston (142) in housing (145).
c.
Install spring retainer (137), spring (136) and
spring retainer (135). Using clutch spring tool
(Item 9, Appendix C), install retaining ring (134).
7-46
