TM 5-3810-306-34
13. INSTALL CLUTCH ASSEMBLIES (70) AND (71).
b. Install retaining ring (52).
a. Install clutch (71) into front of transmission
16. INSTALL TRANSMISSION COVER (58).
housing.
a. Position new gasket (59) on front of transmission
b. Install clutch (70) into rear of transmission
housing.
housing.
b. Install new preformed packing (63c) and sleeve
c.
Install second gear (69).
(63d).
d. If removed, install retaining ring (68).
c.
Align lock ball (63b) in idler shaft (64) bearing
with notch in transmission cover (58).
e. Install retaining ring (67).
d. Tap transmission cover (58) into place and
f.
Install spur gear (66) and retaining ring (65).
secure with thirteen capscrew (53) and new
lockwashers (54).
14. INSTALL SIX SPEED IDLER SHAFT AND GEAR
(64).
e. Install two nuts (55) and new lockwashers (56).
15. INSTALL BEARING (63).
f.
Torque capscrews (53) to 52-57 ft-lbs (69-76
Nm
).
a. Press bearing (63) onto clutch (71) with ring
groove to front.
7-52
