TM 5-3810-306-34
b. Insert cable (11) into switch (10) and
tighten connector nut (6).
c. Connect electrical wires
to
contact
terminals.
1) Main Boom: Connect wires to
terminals 23 and 24 as tagged.
2) Auxiliary Boom: Install 4700 ohm
resistor between terminals 12 and
24. Connect wires to terminals 12
and 23 as tagged.
d. Install switch contact cover (5) with
screws (4).
e. Install cover (3) with nuts (1) and
washers (2).
f. Attach chain and weight to switch (10)
by installing link (7).
2. CONNECT NEGATIVE BATTERY CABLE
AT SHUNT. (REFER TO TM 5-3810-306-
20.)
END OF TASK
14-19
