TM 55-8115-202-14
INSTALLATION:
REMOVAL:
STEP 1.
INSTALL INNER UNDERLAPPING ZEES
STEP 1.
REMOVE OUTER OVERLAPPING
AND CORNER ANGLES FIRST, USING
CORNER ANGLES FIRST, DRILLING
DRIVE RIVETS AND SCREWS.
OUT DRIVE RIVETS AND REMOVING
SCREWS. CAREFULLY PRY CORNER
STEP 2.
INSTALL OUTER CORNER ANGLES
ANGLE LOOSE.
SIMILARLY.
STEP 2.
REMOVE OTHER CORNER ANGLES AND
STEP 3.
REMOVE BUTTON PLUGS ON ALL
ZEES SIMILARLY, AS REQUIRED.
CORNER ANGLES AND ZEES
REPLACED.
STEP 3.
USE A SHARP TOOL TO CUT AND
REMOVE FOAM INSULATION.
STEP 4.
APPLY FOAM INSULATION THROUGH
BUTTON PLUG HOLES TO FILL
SPACES.
STEP 5.
INSTALL BUTTON PLUGS.
