TM 55-8145-202-14
g.
Installation.
(1) Position box (4) on container wall and install four cap screws (2) and washers (3).
(2) Close cover (1) on box (4) and fasten latch.
4-14.
IDENTIFICATION PLATE.
This task covers:
a. Removal
b. Installation
INITIAL SET-UP:
Tools:
Materials/Parts:
General Mechanics Tool Kit (Item 1, App B)
Pop Rivet (Item 13, App E)
NOTE
This procedure applies to all identification plates.
a.
Removal.
(1) Remove four drive rivets (1) from identification plate (2).
(2) Remove identification plate (2).
b.
Installation.
(1) Position identification plate (2).
4-9
