TM 9-3950-253-13&P
0009
RAISE A PARTIALLY SUBMERGED CONTAINER - Continued
Attaching Upper Guides
1.
Reverse vehicle to position upper guides on lift frame (Figure 1, Item 2) just above top of container
(Figure 1, Item 3). If necessary, use joystick (Figure 1, Item 1) to adjust height of lift frame.
Figure 1. Position Upper Guides Above Container.
NOTE
DO NOT attempt to complete step 2 if upper guides do not become fully located on corner
castings. Instead, load and stow lift frame (WP 0007) and reposition vehicle to pick up
other end of container.
2.
Keeping engine at idling speed, set joystick (Figure 2, Item 1) to UNLOAD and move vehicle as required to
ensure upper locating pins on lift frame (Figure 2, Item 2) fully descend into upper corner castings of
container (Figure 2, Item 3). Top plates of upper guides should be in contact with corner castings.
Figure 2. Lower Lift Frame to Container.
03/15/2011Rel(1.10)root(opunuwp)wpno(O582009)