TM 9-3950-253-13&P
OPERATOR MAINTENANCE
OPERATION UNDER UNUSUAL CONDITIONS
INITIAL SETUP:
References
Equipment Condition (cont.)
Lift frame retrieved and unloaded (WP 0007)
Slider bed assemblies in container configuration
MODE switch set to MAN M.F. position
(PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P)
Stowage toggle switch set to OFF position
Equipment Condition
Lifting mechanism in deployed position
NO TRANS light on (PLS: TM 9-2320-364-14&P,
(PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P)
HEMTT: TM 9-2320-326-14&P)
INTRODUCTION
This work package contains instructions on how to operate the Enhanced Container Handling Unit (E-CHU) under
unusual conditions.
Before operating E-CHU under unusual conditions, read and become familiar with the warnings located in the
Warning Summary at the front of this manual, Equipment Description and Data (WP 0002), Theory of Operation
(WP 0003), Description and Use of Operator Controls (WP 0004), Operation Under Usual Conditions (WP 0005),
Slider Bed Configuration (WP 0006), Unloading and Loading Empty Lift Frame (WP 0007), and Loading and
Unloading Container (WP 0008).
RAISE A PARTIALLY SUBMERGED CONTAINER
Starting Conditions
1.
Lifting mechanism is in deployed position with lift frame suspended on hook and bail bar lock installed on
hook (WP 0007).
2.
Slider bed assemblies are in container configuration (WP 0006).
3.
MODE switch is set to AUTO (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
4.
Stowage toggle switch set to OFF position (WP 0004).
5.
NO TRANS light is on (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
0009-1
03/15/2011Rel(1.10)root(opunuwp)wpno(O582009)