TM 9-3950-253-13&P
0009
RAISE A PARTIALLY SUBMERGED CONTAINER - Continued
Lock Slide Housings
WARNING
During the following adjustments, personnel are required to work outside vehicle where
there are several projecting parts, and personnel are required to bend down. Take care
when bending and straightening. A hard hat is required. Failure to follow this warning may
result in injury to personnel. Seek medical attention in the event of an injury.
NOTE
The following procedure is for left upper slide lock. Repeat same procedure for right side.
1.
Remove locking pin (Figure 6, Item 4) from slide housing (Figure 6, Item 1).
2.
Push locking handle (Figure 6, Item 3) toward container (Figure 6, Item 2) to secure slide lock in upper
corner casting.
3.
Install locking pin (Figure 6, Item 4) in slide housing (Figure 6, Item 1).
Figure 6. Lock Both Slide Housing Locking Handles.
03/15/2011Rel(1.10)root(opunuwp)wpno(O582009)