TM 9-3950-253-13&P
OPERATOR MAINTENANCE
FRONT SLIDER BED WILL NOT CHANGE CONFIGURATION
INITIAL SETUP:
Equipment Condition
Equipment Condition (cont.)
Vehicle parked on level ground, in neutral gear
(PLS: TM 9-2320-364-14&P,
with parking brake applied
HEMTT: TM 9-2320-326-14&P)
TROUBLESHOOTING PROCEDURE
SYMPTOM
FRONT SLIDER BED WILL NOT CHANGE CONFIGURATION
MALFUNCTION
There is mud and debris in and around pivot point of front and rear slider bed.
CORRECTIVE ACTION
Remove mud and debris from pivot point.
MALFUNCTION
There is mud and debris in and around clamping device.
CORRECTIVE ACTION
Remove mud and debris from clamping device.
MALFUNCTION
Clamping device is damaged, or pins or springs are misaligned.
CORRECTIVE ACTION
Notify Field Maintenance.
MALFUNCTION
Pivot pin is damaged, or front or rear slider bed housing is damaged or bent.
CORRECTIVE ACTION
Notify Field Maintenance.
END OF WORK PACKAGE
0026-1/blank
03/15/2011Rel(1.10)root(tswp)wpno(T582025)