TM 9-3950-253-13&P
0070
TRANSPORT LOCK SENSOR HARNESS REMOVAL
NOTE
Perform steps 1 and 2 for both right and left sides.
1.
Remove transport lock sensor harness (Figure 6, Item 4) from transport lock sensor (Figure 6, Item 3).
2.
Remove locknut (Figure 6, Item 6), washer (Figure 6, Item 7), clamp (Figure 6, Item 5), bolt (Figure 6,
Item 1), and washer (Figure 6, Item 2) from transport lock sensor harness (Figure 6, Item 4). Discard
locknut.
Figure 6. Transport Lock Sensor Harness Removal.
END OF TASK
VALVE HARNESS REMOVAL
1.
Loosen three wing bolts (Figure 7, Item 1) and remove manifold cover (Figure 7, Item 2) from stowage
assembly (Figure 7, Item 11).
2.
Loosen screw (Figure 7, Item 4) and remove unstow harness (Figure 7, Item 3) from hydraulic valve
(Figure 7, Item 5).
3.
Loosen screw (Figure 7, Item 10) and remove stow harness (Figure 7, Item 9) from hydraulic valve
(Figure 7, Item 5).
4.
Loosen screw (Figure 7, Item 7) and remove stowage latch harness (Figure 7, Item 8) from pneumatic valve
(Figure 7, Item 6).
03/15/2011Rel(1.10)root(maintwp)wpno(M582069)