TM 9-3950-253-13&P
0070
E-CHU INTERFACE LOOM REMOVAL FROM VEHICLE WIRING HARNESS
1.
Disconnect E-CHU interface loom (Figure 8, Item 2) from control box (Figure 8, Item 1).
2.
Disconnect vehicle wiring harness (Figure 8, Item 3) from E-CHU interface loom (Figure 8, Item 2).
Figure 8. Disconnect E-CHU Interface Loom.
END OF TASK
STOWAGE GUIDE SENSOR HARNESS REMOVAL
NOTE
Perform steps 1 through 3 for both right and left sides.
1.
Disconnect stowage guide sensor harness (Figure 9, Item 3) from stowage guide sensor (Figure 9, Item 2).
2.
Remove four bolts (Figure 9, Item 5), two cable clamp caps (Figure 9, Item 6), and stowage guide sensor
harness (Figure 9, Item 3) from stowage guide (Figure 9, Item 4).
3.
Disconnect stowage angle sensor harness (Figure 9, Item 7) from stowage angle sensor (Figure 9, Item 1).
03/15/2011Rel(1.10)root(maintwp)wpno(M582069)