TM 9-3950-253-13&P
0075
HOOK ARM SENSOR REMOVAL
WARNING
During these procedures, the operator will be required to climb on and around the vehicle.
Be sure to wear suitable footwear, ensure no surfaces are slippery, wear suitable gloves
and hard hat and maintain three points of contact to the vehicle. Failure to follow this
warning may result in injury to personnel. Seek medical attention in the event of an injury.
NOTE
Tag and mark position of all harnesses to aid in installation.
Remove and discard tiedown straps as required.
1.
Disconnect electrical connector (Figure 1, Item 1) from hook arm sensor (Figure 1, Item 2).
2.
Remove locking nut (Figure 1, Item 4) from hook arm sensor (Figure 1, Item 2).
3.
Remove hook arm sensor (Figure 1, Item 2) from bracket (Figure 1, Item 3).
Figure 1. Hook Arm Sensor.
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M582074)