TM 9-3950-253-13&P
FIELD MAINTENANCE
PNEUMATIC HOSE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Equipment Condition (cont.)
Tool Kit, General Mechanic s (WP 0118, Table 2,
Air pressure in pneumatic system relieved
Item 2)
(PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P)
Lift frame placed on level ground (WP 0007)
Materials/Parts
Hook arm fully extended
Rag, Wiping (WP 0120, Table 1, Item 16)
(PLS: TM 9-2320-364-14&P,
Strap, Tiedown, Electrical Components
HEMTT: TM 9-2320-326-14&P)
(WP 0120, Table 1, Item 17)
Tag, Marker (WP 0120, Table 1, Item 20)
References
Equipment Condition
Vehicle parked on level ground, in neutral gear
with parking brake applied
(PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P)
REMOVAL
WARNING
Lift frame must be positioned on solid level ground with adequate support from
stands.
Pneumatic hoses are under pressure. Use caution and wear protective goggles or
face shield.
During these procedures, the operator will be required to climb on and around the
vehicle. Be sure to wear suitable footwear, ensure no surfaces are slippery, wear
suitable gloves and hard hat and maintain three points of contact to the vehicle.
Failure to follow these warnings may result in injury or death to personnel. Seek
medical attention in the event of an injury.
NOTE
Note routing and tag all pneumatic lines to aid in installation.
0085-1
03/15/2011Rel(1.10)root(maintwp)wpno(M582084)