TM 10-3930-641-34-1
FUEL INJECTION PUMP HOUSING DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 8 of 11)
LOCATION/ITEM
ACTION
REMARKS
11. Spring (35), piston (36), pin (34),
Install in valve body (33).
preformed packing (31) and (30
NOTE
Pin (36) must extend out from either side of
valve body.
12. Oil bypass valve (32)
Install.
13. Shaft (44)
Install.
14. Dowel (45)
Install.
NOTE
After installation the height of the shaft must
be 0.66 in. (1.65 cm) and the height of the
dowel must be 0.25 in. (0.64 cm).
15. Lifters (12)
Install.
NOTE
If new lifters or spacers are used then the fuel
See page 3-268.
pump timing must be reset.
16. Left fuel rack (19) and right fuel Install.
rack (18)
Go on to Sheet 9
3-54
