TM 10-3930-641-34-1
FUEL INJECTION PUMP HOUSING DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 10 of 11)
LOCATION/ITEM
ACTION
REMARKS
21. Idler gear (39)
Install on shaft.
22. Drive gear (38)
Install.
NOTE
Bevel side of gear must be down. Teeth of idler
gear and drive gear must be aligned.
23. Pump cover (40)
Install.
24. Pinion gear of pinion assembly
Install as follows:
a. Use an 11/16" (1.75 cm) socket and a "C"
clamp with a 9" (23 cm) opening.
b. Drive the pinion gear until the drive gear
contacts the shoulder of the pinion gear
shaft.
25. Camshaft gear (28)
Install.
26. Retainer (27) and capscrew (26)
Install on gear (28).
27. Cover (24) and gasket (25)
Install.
Go on to Sheet 11
3-56