TM 10-3930-641-34-2
TORQUE CONVERTER ASSEMBLY (CONT)
(Sheet 4 of 15)
LOCATION/ITEM
ACTION
REMARKS
NOTE
Be sure all parts are clean before assembly.
1. Turbine (38) and converter housing Check clearance between turbine and converter
(33)
housing.
NOTE
Difference between inside diameter of housing
(A) and outside diameter of turbine (B) must
be at least .070 - .110 in. (1.78 - 2.80 mm) but
no more than 0.135 in. (3.43 mm). Check in
several locations.
2. Outer impeller (50) and converter
Check clearance between outer impeller and
housing (33).
converter housing.
NOTE
Difference between inside diameter of the
housing (D) and outside diameter of the
outer impeller (C) must be at least .077 - 0.103
in. (1.96 - 2.62 mm) but no more than 0.135
in. (3.43 mm). Check in several locations.
TA099423
Go on to Sheet 5
4-30
