TM 10-3930-641-34-2
TORQUE CONVERTER ASSEMBLY (CONT)
(Sheet 6 of 15)
LOCATION/ITEM
ACTION
REMARKS
8. Turbine (38)
Put in position over hub (39).
9. Twenty capscrews (37) and washers
Install and tighten to a torque of 34-38 lb. ft.
(30)
(45-51 N-m).
10. Turbine (38) and hub (39)
Put in position in housing (33).
11. Two retainers (34) and (35), roller
Install on hub (39) as shown.
assembly (36)
12. Bearing (45)
Install in carrier assembly (46) with driver.
Be sure bearing is flush with counterbore in
carrier assembly.
Go on to Sheet 7
4-32