TM 10-3930-641-34-2
TORQUE CONVERTER ASSEMBLY (CONT)
(Sheet 7 of 15)
LOCATION/ITEM
ACTION
REMARKS
13. Carrier (46) hub (39)
Check clearance between carrier and hub.
NOTE
Clearance (G) must be 0.0028 - 0.0068 in.
(0.071 - 0.173 mm). If clearance is not within
limits, then replace bearing between carrier
and hub.
14. Stator (43) and inner impeller (52)
Check clearance between stator and inner
impeller.
NOTE
Difference between diameter of the stator (J)
and diameter of the inner impeller (H) must
be at least 0.022 - 0.042 in. (0.56 - 1.06 mm)
but no more than 0.0048 in. (1.22 mm).
TA099245
Go on to Sheet 8
4-33
