TM 10-3930-641-34-2
TORQUE CONVERTER ASSEMBLY (CONT)
(Sheet 11 of 15)
LOCATION/ITEM
ACTION
REMARKS
30. Two guide pins (66)
Install in housing (58).
31. Housing (58)
a. Fasten to hoist.
b. Put in position on converter.
NOTE
Be sure pins (66) in housing (58) go through
piston plate and into impeller.
32. Six capscrews (71) and washers (72)
Install and tighten to a torque of 80-90 lb. ft.
that secure clutch housing to
(108-122 N'm).
impeller
33. Thirty-six capscrews (73) and
Install and tighten to a torque of 34-38 lb. ft.
washers (74) that secure clutch
(43-49 N-m).
housing to converter housing.
Go on to Sheet 12
4-37
