TM 10-3930-641-34-2
TORQUE CONVERTER ASSEMBLY (CONT)
(Sheet 10 of 15)
LOCATION/ITEM
ACTION
REMARKS
25. Disc assembly (49)
Install.
26. Twelve capscrews (47) and washers
Install. Tighten bolts to a torque of 19-21 lb.
(48).
ft. (26-28 N-m).
27. Teflon seal (75) on piston (77)
a. Install as shown at right.
b. Put piston (77) in position on disc
assembly (49).
NOTE
Be sure holes in piston aline with holes in
disc.
28. Bearing (59)
a. Install in housing (58) using a driver.
b. Bearing (59) must be flush with outside
surface of housing (58).
29. Teflon seals (76)
Install in housing (58).
TA099248
Go on to Sheet 11
4-36
