TM 10-3930-675-10
0007 00-15
PREPARATION FOR TRANSPORT - CONTINUED
0007 00
AIR TRANSPORT - CONTINUED
k.
Stow ramp in dolly wheels storage compartment. Secure ramp with straps.
l.
Raise tophandler so that dolly wheels are off the ground approximately 2 ft (0.6 m).
m. Install lower pin in lower hole of each dolly wheel. Lock pin in position with retaining pin.
n.
Lower tophandler until all four dolly wheels are resting on ground.
o.
At side of locking valve at base of each lift cylinder, loosen float valve jamnut and turn float valve screw five turns
counterclockwise. Retighten jamnut to prevent loss.
UPPER
PIN
RETAINING
PINS
LOWER
PIN
DOLLY
WHEEL
VALVE SCREW
JAM-
NUT
LOCKING
VALVE
