Error Code 1213 - Oil Temperature Sensor Circuit Failure - Cont

Error Code 1213 - Oil Temperature Sensor Circuit Failure - Cont - TM-10-3930-675-20-1_367

Error Code 1213 - Oil Temperature Sensor Circuit Failure - Cont - TM-10-3930-675-20-1_369

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
334

TM 10-3930-675-20-1 0020 00-24 ENGINE TEMPERATURE SENSORS AND CIRCUITS TROUBLESHOOTING - CONTINUED 0020 00 Table 8. Error Code 1213 - Oil Temperature Sensor Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1213 - Oil Temperature Sensor Circuit Failure - Continued a. Measure resistance from pin 42 of sensor harness connector to all other pins in connector. Resistance should be greater than 100k ohms. b. Measure resistance from pin 43 of sensor harness connector to all other pins in connector. Resistance should be greater than 100k ohms. 7. Place ignition switch in OFF position. Disconnect engine harness from oil pressure/ temperature sensor and disconnect sensor harness connector from engine ECU. Perform the following resistance checks: If engine harness requires replacement, notify SRA. USE TEST LEAD KIT P/N 3822758 >100K OHMS >100K OHMS

Privacy Statement
Press Release
Contact