Table 7. Error Code 1212 - Oil Temperature Sensor Circuit Failure Troubleshooting Procedures

Table 6. Error Code 1155 - Intake Air Temperature Sensor Circuit Failure Troubleshooting Procedures

Error Code 1212 - Oil Temperature Sensor Circuit Failure - Cont - TM-10-3930-675-20-1_364

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
329

TM 10-3930-675-20-1 0020 00-19 ENGINE TEMPERATURE SENSORS AND CIRCUITS TROUBLESHOOTING - CONTINUED 0020 00 Table 7. Error Code 1212 - Oil Temperature Sensor Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1212 - Oil Temperature Sensor Circuit Failure - Continued 3. Measure resistance from pin 4 (or D) to pin 2 (or B) of oil pressure/temperature sensor. Resistance should be 300-90k ohms. If resistance is not as specified, replace oil pressure/temperature sensor (WP 0093 00). 4. Place ignition switch in OFF position and disconnect sensor harness from engine ECU. a. Inspect sensor harness and engine ECU connectors for dirty, corroded, bent, broken, and pushed back or extended pins. Clean and repair connector(s) as required (WP 0111 00). b. Check sensor harness and engine ECU for dirt or moisture in or on connectors and for missing or damaged connector seals. Remove dirt and moisture from connector. Replace missing or damaged connector seals (WP 0111 00). USE TEST LEAD KIT P/N 3822917 300-90K OHMS

Privacy Statement
Press Release
Contact