Error Code 1434 - Unswitched Battery Supply Circuit Failure - Cont

Error Code 1434 - Unswitched Battery Supply Circuit Failure - Cont - TM-10-3930-675-20-1_424

Error Code 1434 - Unswitched Battery Supply Circuit Failure - Cont - TM-10-3930-675-20-1_426

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
388

TM 10-3930-675-20-1 0025 00-5 ENGINE BATTERY VOLTAGE CIRCUITS TROUBLESHOOTING - CONTINUED 0025 00 Table 1. Error Code 1434 - Unswitched Battery Supply Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1434 - Unswitched Battery Supply Circuit Failure - Continued c. Measure voltage from OEM harness connector pin 17 to pin 39. Voltage should be 24-30V. d. Measure voltage from OEM harness connector pin 18 to pin 40. Voltage should be 24-30V. e. Measure voltage from OEM harness connector pin 28 to pin 50. Voltage should be 24-30V. 7. Place ignition switch in OFF position, disconnect OEM harness connector from engine ECU (794), and disconnect positive (+) and negative (-) terminals from battery. Perform the following resistance checks. Resistance should be greater than 100k ohms. If resistance is not as specified, notify SRA to repair or replace engine harness. 24-30V USE TEST LEAD KIT P/N 3822758

Privacy Statement
Press Release
Contact