TM 10-3930-675-20-2
0075 00-5
CAB POSITION PROXIMITY SWITCHES REPLACEMENT - CONTINUED
0075 00
CAB SUPPORT-MOUNTED PROXIMITY SWITCH REMOVAL - CONTINUED
CAB SUPPORT-MOUNTED PROXIMITY SWITCH INSTALLATION
1.
Position proximity switch (12) to vehicle.
2.
Feed cable (23) thru cable nut (22), grommet (21), and bushing (20) and into junction box (10).
3.
Using a jeweler’s screwdriver, connect three wires of cable (23) to terminal blocks (19) of junction box (10).
4.
Install bushing (20), grommet (21), and cable nut (22) to junction box (10).
5.
Install cover (9) to junction box (10) and tighten four screws (8).
NOTE
Perform step 6 to install bracket to cab support.
6.
Install bracket (11) to cab support (18) with four washers (17), two screws (16), and new locknuts (15).
7.
Loosely install jamnut (14) to proximity switch (12).
8.
Position proximity switch (12) upward thru bracket (11) and loosely install upper jamnut (13).
9.
Adjust jamnuts (13 and 14) to position proximity switch (12) as noted during removal and tighten jamnuts.
10.
Install new tiedown straps as needed.
11.
Install middle and rear transmission access covers (WP 0135 00).
12.
Return cab to operational position (TM 10-3930-675-10).
END OF WORK PACKAGE
19
10
20
21
22
23
