OIL PRESSURE/TEMPERATURE SENSOR REMOVAL

INTAKE MANIFOLD PRESSURE SENSOR INSTALLATION - TM-10-3930-675-20-2_245

FUEL LEVEL SENDING UNIT REPLACEMENT - TM-10-3930-675-20-2_247

TM-10-3930-675-20-2 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
191

TM 10-3930-675-20-2 0093 00-6 ENGINE SENSORS REPLACEMENT - CONTINUED 0093 00 OIL PRESSURE/TEMPERATURE SENSOR REMOVAL 1. Disconnect connector (20) of engine wiring harness (2) from oil pressure/temperature sensor (19). 2. Remove oil pressure/temperature sensor (19) and o-ring seal (18) from engine (1). Discard o-ring seal. OIL PRESSURE/TEMPERATURE SENSOR INSTALLATION 1. Install new o-ring seal (18) on oil pressure/temperature sensor (19). 2. Install oil pressure/temperature sensor (19) on engine (1). Tighten sensor to 120 lb-in (14 Nm). NOTE Ensure locking tab on connector snaps in place. 3. Connect connector (20) of engine wiring harness (2) to sensor (19). 4. Install engine cover (WP 0143 00). END OF WORK PACKAGE 18 19 1 20 2

Privacy Statement
Press Release
Contact