TM 10-3930-675-20-2
0099 00-2
BOOM EXTENSION SENSOR REPLACEMENT - CONTINUED
0099 00
REMOVAL - CONTINUED
2.
Open cable connector (5) and remove cable connector to disconnect ring of cable (7) from rear of extension boom (6).
3.
While holding ring of cable (7), allow cable to retract into boom extension sensor (8).
4.
Disconnect connector (11) of wiring harness from boom extension sensor (8).
5.
Remove two screws (9), washers (10), and boom extension sensor (8) from boom (4).
5
6
7
9,10
4
8
11
