TM 10-3930-675-20-2
0100 00-4
TOPHANDLER ANGLE SENSOR REPLACEMENT - CONTINUED
0100 00
INSTALLATION
1.
Position tophandler angle sensor (4) with cable (15) to vehicle.
2.
Using a jewelers screwdriver, connect three wires of cable (15) to terminal block (19) of tophandler junction box (12).
3.
Install plastic covers (20) over excess cable (15) of tophandler angle sensor (4).
4.
Install cover (11) to tophandler junction box (12) and tighten six screws (10).
5.
Install grommet (13) and tighten cable nut (14).
6.
Install cable (15) to boom extension with three cable clamps (18), washers (17), and screws (16).
20
15
19
12
15
20
10
11
12
13
14
15
16,17,18