TM 10-3930-675-20-2
0114 00-2
TRANSMISSION ASSEMBLY HYDRAULIC HOSES AND PIPES REPLACEMENT - CONTINUED
0114 00
REMOVAL
1.
Refer to location diagram and find hydraulic hose or pipe to be removed.
2.
Remove and discard tiedown straps, as needed, to release hydraulic hose.
NOTE
Remove adapter fitting and o-ring seal only if damaged or leaking.
3.
Position suitable container to catch hydraulic oil retained in hose or pipe and disconnect hose or pipe from adapter fit-
ting.
4.
Remove fluid passage bolt, hose connection, and two o-ring seals from transmission. Discard o-rings.
5.
Loosen each of two fitting nuts and remove pipe (8, 9, 10 or 11) from transmission.
3
4
5
6
7
8
9
10
11
1
2
TRANSMISSION ASSEMBLY HOSE
AND PIPE LOCATION DIAGRAM
12