TM 10-3930-675-20-2
0140 00-13
TOPHANDLER WEAR PLATES REPLACEMENT - CONTINUED
0140 00
STYLE E WEAR PLATE REMOVAL - CONTINUED
1.
Position sliding beam on cribbing to relieve weight on wear plate (37) in sideshift carriage (24).
2.
Thru access hole in bottom of sideshift carriage (24), remove two screws (39) and washers (40) from lock plate (38).
3.
Slide wear plate (37) and lock plate (38) from sideshift carriage (24).
STYLE E WEAR PLATE INSTALLATION
1.
Position wear plate (37) with lock plate (38) on sideshift carriage (24).
2.
Aline lock plate (38) holes with holes in sideshift carriage (24).
3.
Install two screws (39) and washers (40) to secure wear plate (37). Tighten screws in accordance with Torque Limits
(WP 0198 00).
4.
Perform operational check of tophandler (TM-10-3930-675-10).
END OF WORK PACKAGE
37,38
24
39,40