TM 10-3930-675-20-2
0171 00-3
CAB LIFTING CYLINDER REPLACEMENT - CONTINUED
0171 00
INSTALLATION - CONTINUED
NOTE
Ensure new o-rings are lubricated with lubricating oil before installation.
4.
Remove cap/plug from two hydraulic hoses (9) and connect hoses to cylinder (4).
5.
Start engine (TM 10-3930-675-10).
6.
Remove wood cribbing from cab transport lift (3).
7.
Open hydraulic reservoir ball valve (WP 0179 00).
8.
Check for leaks and proper operation of cab lifting cylinder (TM 10-3930-675-10). Shut down engine.
9.
Check oil level in hydraulic reservoir (LO 10-3930-675-12).
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0183 00).
END OF WORK PACKAGE
