TM 10-3930-675-24-2
ROCKER ARM ASSEMBLY MAINTENANCE - CONTINUED
0206 00
INSTALLATION
NOTE
Rocker arm assembly must be installed in same position from which it was removed.
1.
Position rocker arm assembly (16) on cylinder head (17). Hand-tighten eight screws (8) and remove key stock (4).
16
8
8
8
4
17
NOTE
Rocker lever side clearance MUST be adjusted before screws are fully tightened.
2.
Set side clearance for rear section of rocker arm assembly as follows:
a.
Tap number five rocker lever support (7) toward front of engine. Tighten mounting screw (8) to 45 lb-in. (5 Nm).
7
8
REAR SECTION
FRONT OF ENGINE
0206 00-7
