TM 10-3930-675-24-2
TOPHANDLER JUNCTION BOX REPLACEMENT - CONTINUED
0222 00
REMOVAL - CONTINUED
13.
Loosen cap (23) on fitting (24) and remove fitting from junction box (3).
14.
Trace route of eight wires (25) of cable (29) to connecting point and disconnect wires. Note connecting point.
15.
Pull cable (29) out from junction box (3).
16.
Remove two screws (26), washers (27), and twistlock indicator light assembly (28) from side of junction box (3). Also
23,24
3
29
28
25
26,27
35
17.
For ARMY and RESET vehicles, remove four screws (30), washers (31), loop clamp (37), and 791 junction box (3),
with two brackets (35) from tophandler.
18.
For ARMY and RESET vehicles, remove four locknuts (32), screws (33), eight washers (34), two brackets (35), and
four rubber grommets (36) from 791 junction box (3). Discard locknuts.
.
32,33,34
35
36
30,31
37
3
350-834
0222 00-4