TM 10-3930-675-24-2
TOPHANDLER JUNCTION BOX REPLACEMENT - CONTINUED
0222 00
REMOVAL - CONTINUED
2.
Remove two plastic covers (4).
4
NOTE
Tag wires to ensure proper connection on installation.
Remove and discard tiedown straps as necessary.
3.
At top of junction box (3), remove locknut (5) and washer (6) and disconnect terminal of large black wire (7), marked
"black", and terminal of small white wires (8) from terminal stud.
4.
Remove locknut (15) and washer (16) and disconnect terminal of large black wire (14), marked "red", and terminal of
small black wires (13) from terminal stud.
NOTE
Note location of fittings for installation.
5.
Loosen cap (10) on each of five fittings (9) and remove fittings from junction box (3).
6.
Pull large black wires (7 and 14) out from junction box (3).
7.
Trace route of each wire (12) in three cables (11) to connecting point and disconnect wire. Note connecting point.
8.
Pull each wire (12) out from junction box (3).
0222 00-2
