TM 10-3930-675-24-2
MOUNTING ENGINE ON REBUILD STAND - CONTINUED
0270 00
INSTALLATION - CONTINUED
d.
Remove three screws (11), washers (10), two O-rings (12), and coolant filter head (9). Discard O-rings.
9
10
11
9
12
10
11
e.
Remove two screws from positions "A" and "B". Replace screws with guide pins.
f.
Remove 16 remaining screws (13), water header plate (1), gasket (14), and guide pins. Discard gasket.
14
1
POSITION "A"
GUIDE PIN
13
POSITION "B"
GUIDE PIN
0270 00-3