TM 10-3930-675-24-2
MOUNTING ENGINE ON REBUILD STAND - CONTINUED
0270 00
INSTALLATION - CONTINUED
2.
Install adapter plate on rebuild stand with five screws. Tighten screws to 135 lb-ft (183 Nm).
ENGINE REBUILD STAND WITH ADAPTER PLATE
NOTE
Ensure lifting brackets are installed on front and rear of engine.
3.
Install guide pins in water header plate mounting screw holes at positions "A" and "B".
POSITION B
POSITION A
WARNING
Engine weighs 2,070 lb (940 kg). Lifting device must have sufficient capacity to lift engine. Failure to
follow this warning may result in death or injury to personnel.
0270 00-4