TM 5-3810-306-34
Section IV. FLYWHEEL MAINTENANCE
FLYWHEEEL HOUSING AND REAR SEAL INSTALLATION
TOOLS: General mechanic's tool kit: automotive (5180-00-177-7033)
Pneumatic or electric drill
1/8 in. drill bit
SUPPLIES:
Preformed packing (Item 221, Appendix B)
Seal (Item 222, Appendix B)
Clean rags (Item 2, Appendix B)
Lubriplate 105 (Item 102, Appendix B)
EQUIPMENT CONDITIONS: Negative battery cable disconnected at shunt.
(Refer to TM 5-3810-306-20.)
Engine removed. (Refer to page 4-2.)
Torque Converter Removed. (Refer to page 7-2.)
Starter removed. (Refer to TM 5-3810-306-20.)
Flywheel removed; (Refer to page 4-32.)
1. REMOVE FLYWHEEL HOUSING (1) AND REAR
REMOVAL:
SEAL (6).
NOTE
a. Remove twelve capscrews (2) from flywheel
If only rear seal needs If only rear seal
housing (1). Remove housing (1).
needs replacement. Step 2 outlines
procedure for removal without
removing flywheel housing or seal
cover.
4-29
