TM 5-3810-306-34
c.
Install engine barring tool TM 5-3810-306-34
through flywheel housing (4) and into flywheel
(1).
d. Hold flywheel (1) from turning with engine
barring tool and J torque capscrews (3) in
sequence shown to 101 ft-lbs (134 Nm).
e. Remove engine barring tool from flywheel
housing (4).
2. INSTALL TORQUE CONVERTER.
(REFER TO
3. INSTALL REAR DECKING.
(REFER TO TM 5-
3810-306-20.)
4. INSTALL ENGINE HOOD. (REFER TO TM 5-3810-
306-20.)
5. CONNECT NEGATIVE BATTERY CABLE
AT
SHUNT. (REFER TO TM 5-3810-306-20.)
END OF TASK
4-33
