TM 5-3810-306-34
2. APPLY COPPER COAT TO BOTH SIDES OF
GASKET (7).
3. INSTALL FRONT GEAR COVER (5).
a. Install new gasket (7) and cover (5).
Secure
loosely with capscrews (3) and (4).
b. Clean crankshaft sealing surface and install
alignment/installation tool from seal kit to align
front cover (5) to crankshaft.
c.
Torque capscrews (3) and (4) to 18 ft-lbs (24
Nm).
d. Remove alignment/installation tool.
4. IF REMOVED, INSTALL FRONT CRANKSHAFT
SEAL (8).
a. Apply a coat of Loctite 277 to outside diameter of
crankshaft seal.
4-46