TM 5-3810-306-34
b. Install pilot from seal kit over crankshaft
d. Connect tagged electrical connector to
and slide on crankshaft seal over pilot.
pulse tachometer.
Remove pilot.
5. INSTALL VIBRATION DAMPER (1) AND
SECURE WITH FOUR CAPSCREWS (2).
6. INSTALL TACHOMETER ANGLE DRIVE.
(REFER TO PAGE 4-56.
7. INSTALL DRIVE BELT, RADIATOR FAN AND
FAN GUARD. (REFER TO TM 5-3810-306-20.)
8. INSTALL RADIATOR SHROUD.
(REFER TO
TM 5-3810-306-20.)
9 INSTALL ENGINE HOOD ASSEMBLY.
(REFER TO TM 5-3810-306-20.
c. Using alignment/installation tool, tap seal
10. CONNECT NEGATIVE BATTERY CABLE AT
until outer edge is even with cover.
SHUNT. (REFER TO TM 5-3810-306-20.)
Remove alignment/installation tool.
11. TEST FOR PROPER OPERATION AND
INSPECT FOR LEAKS. (REFER TO
TM 5-3810-306-10.)
END OF TASK
4-47
